LG webOS
Veyli Player runs on LG commercial displays with webOS Signage 4.0 or later. You can install it from LG’s SI Server setting (recommended) or with an IPK file on a USB stick.
Consumer LG TVs are not supported. You need an LG commercial / signage display.
Install
SI Server (recommended)
Open the installation menu
With the LG signage remote, press Settings for 5 seconds (or press Home → Settings → General → Installation menu with password 000000, depending on model).
Configure SI Server
Go to Ez Settings → SI Server Setting and set:
| Field | Value |
|---|---|
| Application launch mode | Local |
| Fully qualified domain name | On |
| FQDN | https://play.veyli.cloud/webos/com.lg.app.signage.ipk |
| Application type | IPK |
| Auto Set (webOS 4.0 and later) | Off |
Install
Set Local application upgrade to Remote and confirm. The display downloads and installs Veyli Player; this takes a minute or two.
Reboot
Power-cycle the display. Veyli Player starts automatically and shows its pairing code.
Pair the screen
The player shows a 6-character pairing code. In app.veyli.cloud go to Screens → Add screen, enter the code, name the screen, and choose its screen group and timezone. See Pair your first screen.
Kiosk and auto-start settings
| Setting | Recommended value |
|---|---|
| Power on status | Power on (resume after power loss) |
| No signal power off | Off |
| Auto power off (4 hours) | Off |
| Screen saver | Off |
| Key lock (IR & local keys) | On once paired |
| Time setting | Automatic (NTP) |
Offline caching
- The player caches media in the display’s internal storage and plays it from there.
- Content keeps playing from the cache when the network is down, including after a reboot; proof-of-play logs upload when it returns.
Tips
- Updates are automatic: however you installed it, the player checks for a new version at every boot and while running, and restarts into it at night. A version that doesn’t start properly is rolled back on the display by itself. You only reinstall the IPK if LG asks for a new app package.
- Video codecs: H.264 and H.265 are hardware-decoded. VP9 support depends on the model.
- Can’t find the installation menu? It varies by firmware — check your display’s installation manual for “SI Server”.
- See Playback issues if video stutters.